To be corrected

To be corrected

Brand Name:DONHN
Use:For 12V12AH battery
Color:Red
size:10*5.3*4 mm

Product Details


Specifications Overview

Brand Name: DONHN

Item Name : Dongsheng enhanced version of intensive Intelligent 

                      repairing electric bicycle 12V20AH high-end battery charger

Place of Origin :Anhui, China (Mainland)

Use:  For 12V20AH  battery

Color: Red

size:  10*5.3*4 mm(To prevail in kind)

Output maximum Voltage: 14.5-14.8V

Output maximum Current: 1.6-1.8A

Conversion current : 0.35-0.5A

Input Voltage: 220V~50HZ

Float voltage:DC13.5-13.9V

Certificate: CE, CCC and CAS certification

Operating Temperature: -20~40℃

Storage Temperature: 20~85℃

Implementation of standard: T/TCDZ0001-2016

suit for: lead-acid battery








Packaging & Delivery


Packaging Details: 30、40、50 pcs/ctn(Depend on the customer's request)

Carton size:  60.5*43.5*33mm  67.5*46*33.5mm   72.5*46.5*37.5mm  76.5*47.5*38mm  etc

Delivery Detail: Depend on the customer's request


Item name

Dongsheng    enhanced version of Intelligent repairing electric bicycle 12V12AH high    quality battery charger

Mode

12V12AH

Input

220V~50HZ

Output

voltage

14.5-14.8V

current

1.6-1.8A

Size(mm)

10*5.3*4 mm(To prevail in kind)

Connector dimension

Optional output connector: 3-port Inline,    3-pin XLR, Alligator clip, 3-port House, Coaxial etc

Special plug:  4-pin XLR, 2-port Inline,    3-pin House,Polarized, 3-port House for Panterra and Grio, Polarized C7 etc.

Protection

Intelligent timing protection ,Short circuit protection,    over current protection, over voltage protection

Suit for

lead-acid battery







Dongsheng enhanced version of Intelligent repairing electric bicycle 12V12AH high quality battery charger has designed highly reliable and meet international safety and electromagnetic compatibility requirements.


A:Input Characteristics:

Input Voltage:    220 V

Input Frequency: 50/60Hz

B:Output Characteristics:

Output Current:  1.6-1.8A    

Output Voltage (CV mode ):  220 V

Rated Voltage: The electric bicycle dry battery 12V12AH charger rated output voltage is specified at 12V

Voltage Range: The electric bicycle lead-acid battery12V12AH charger output voltage will be performed  0 V when the load is 0A

C:Use status indication:

Status

LED Indication

Chargering

Red light

After charger

No    light

D:Test  for The electric bicycle 12V12AH lead-acid battery charger

1.Material pre - storage inspection: Anti-flame retardant test, Anti-weight test,Each device test etc.

2.Full load aging test:  semi-finished product and finished products must be aging test.

3.Debug parameter test.

4.Drop Height test: 760mm Three*faces (once on each plane)

5.Packaging test : Check whether the package is intact and Anti-weight test.

E:Protection for The electric bicycle battery 12V12AH charger

Over Voltage Protection: The power supply will be auto recovered when faults remove

Over Current Protection:When the current exceeds the maximum value, the protective device to protect the operation of a way. When the current flowing through the protected original exceeds a preset value, the protection device is activated and the time limit is used to ensure the selectivity of the action, causing the circuit breaker to trip or give an alarm signal.

Short Circuit Protection:The electric bicycle battery 12V12AH charger Output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)






Optional batter charger output plug (customizable)


1. 2-port inline

2. 3-port inline

3. 4-port inline

4. 3-pin XLR

5. 4-pinXLR

6. Alligator clip

7. 3-port house

8. 3-port house for panterra and gio

9. 3-pin house

10. Andera on 30A

11. Amders on 50A

12. Coaxial

13. RCA

14. Polarized

15. Polarized c7


Optional battery charger input plug (customizable)


1.usa

2.France

3.Europe

4.Australia

5.Brazil

6.United kingdom

7.South africa

8.Korea

9.Argentina

10.India






Attention


1.The charger is only applicable for lead-acid battery (quantity and rated capacity should be referred to the mark of the outer shell of charger)

2.Do not charge the nonchargeable battery.

3.It is used indoor to prevent from the rain. During the charging, the charger is forbidden to cover and it must with good ventilation environment. It is forbidden to use charger in electric vehicle to prevent from fire disaster made by fire, sparks and explosive gas.

4.The wire must be changed by manufacture or the staff of maintenance to get rid of danger.

5.The power supply should be cut off before the connecting or disconnecting of the charger and battery.

6.Do not disassemble or replace the internal parts of the charger.

*Reminder: After the end of the charge must cut off the 220v power supply, 30 seconds after the charger can be recharged.

Police explosion gas, flame and spark, Adequate ventilation during charger


As one of the leading electric bicycle charger manufacturers and suppliers in China, we pay great attention to quality and performance. If the enhanced version of intelligent repairing electric bicycle 12v12ah high quality battery charger caters to your requirement, welcome to wholesale the quality charger made in China from us. For more info, welcome to contact our factory.

As one of the leading electric bicycle charger manufacturers and suppliers in China, we pay great attention to quality and performance. If the To be corrected caters to your requirement, welcome to wholesale the quality charger made in China from us. For more info, welcome to contact our factory.
Hot Tags: DonHN 12V baterry charger, China, manufacturers, factory, wholesale, made in China

Related Products

Inquiry