Brand Name: DONHN
Item Name :Dongsheng Intelligent repairing electric bicycle 36V2A high quality lithium battery charger
Place of Origin ：Anhui, China (Mainland)
Use: For 36V2A lithium battery
size: 15*6.7*4 mm （To prevail in kind）
Output maximum Current: 1.96-2.04A
Conversion current :0.35-0.45A
Certificate:CE, CCC and CAS certification
Implementation of standard: T/TCDZ0001-2016
suit for: lithium battery
Packaging & Delivery
Packaging Details: 30、40、50 pcs/ctn（Depend on the customer's request）
Carton size: 60.5*43.5*33mm 67.5*46*33.5mm 72.5*46.5*37.5mm 76.5*47.5*38mm etc
Delivery Detail: Depend on the customer's request
Dongsheng Intelligent repairing electric bicycle 36V2A high quality lithium battery charger
15*6.7*4 mm（To prevail in kind）
Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc
Special plug: 4-pin XLR, 2-port Inline, 3-pin House,Polarized, 3-port House for Panterra and Grio, Polarized C7 etc.
Intelligent timing protection ,Short circuit protection, over current protection, over voltage protection
This product is a lithium battery smart charger, using switching power supply and microcontroller control technology.it has the following features:
1. Voltage input range: 180-240vac
2. Input and output overvoltage protection
3. With anti-flooding function
4. Small Output ripple
5. Internal temperature protection
6. Timing protection: the charger starts charging, to the end of the maximum charge time of 14 ± 0.5 hours, beyond this time, the charger off the output.
7. Shell all use flame-retardant ABS material, the use of more secure.
Dongsheng Intelligent repairing electric bicycle 36V2A high quality lithium battery charger has designed highly reliable and meet international safety and electromagnetic compatibility requirements.
Input Voltage: 220 V
Input Frequency: 50/60Hz
Output Current: 2.0A±0.2A
Output Voltage (CV mode ): 220 V
Rated Voltage: The electric bicycle battery 36V2A charger rated output voltage is specified at 36V
Voltage Range: The electric bicycle battery 36V2A charger output voltage will be performed 0 V when the load is 0A
C:Use status indication:
D:Test for The electric bicycle battery 36V2A charger
1.Material pre - storage inspection: Anti-flame retardant test, Anti-weight test,Each device test etc.
2.Full load aging test: semi-finished product and finished products must be aging test.
3.Debug parameter test.
4.Drop Height test: 760mm Three*faces (once on each plane)
5.Packaging test : Check whether the package is intact and Anti-weight test.
E:Protection for The electric bicycle battery 36V2A charger
Over Voltage Protection: The power supply will be auto recovered when faults remove
Over Current Protection：When the current exceeds the maximum value, the protective device to protect the operation of a way. When the current flowing through the protected original exceeds a preset value, the protection device is activated and the time limit is used to ensure the selectivity of the action, causing the circuit breaker to trip or give an alarm signal.
Short Circuit Protection:The electric bicycle battery 36V2Acharger Output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Optional batter charger output plug （customizable）
1. 2-port inline
2. 3-port inline
3. 4-port inline
4. 3-pin XLR
6. Alligator clip
7. 3-port house
8. 3-port house for panterra and gio
9. 3-pin house
10. Andera on 30A
11. Amders on 50A
15. Polarized c7
Optional battery charger input plug （customizable）
How to use and precautions:
1. When charging, want to plug the battery box plug, then plug the utility AC220v plug, charging the end of the contrary, want to pull the mains AC220v plug, then the battery box plug.
2. When charging normally, the charger's indicator shows red, and when the charge is full, the charge indicator shows green.
3. If the charger ambient temperature is too high, a red light flashes, the charger is in the temperature protection state, please move the charger to a cool or ventilated place, when the charger internal temperature to 60 degrees to return to normal charge
4. If there is no battery access, the charger output is less than 42v pulse voltage, the test positive and negative side of the output plus 1k ohm resistor load, you can test the actual charger charging voltage
Reminder: After the end of the charge must cut off the 220v power supply, 30 seconds after the charger can be recharged.
Police explosion gas, flame and spark, Adequate ventilation during char
As one of the leading electric bicycle charger manufacturers and suppliers in China, we pay great attention to quality and performance. If the intelligent repairing electric bicycle 36v2a high quality lithium battery charger caters to your requirement, welcome to wholesale the quality charger made in China from us. For more info, welcome to contact our factory.